user-pppoe              Cleartext-Password := "user-pppoe"
                        ERX-Service-Activate:1 += "REDIRECT(pp0)",
                        ERX-Service-Activate:2 += "RATE-LIMIT(pp0,1000000)"

===

rad_recv: Access-Request packet from host 10.10.209.1 port 50760, id=155, length=167
        User-Name = "user-pppoe"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        CHAP-Password = 0xfea9a42f315c82863a7c50d80d1b562a51
        CHAP-Challenge = 0x49610dab9051e7f131a8ff74478a11ffa6f5b77da8cc6ee28c
        Chargeable-User-Identity = ""
        Acct-Session-Id = "77"
        ERX-Dhcp-Mac-Addr = "f0de.f150.ece7"
        NAS-Identifier = "MX480"
        NAS-Port = 268435657
        NAS-Port-Id = "MX480:xe-1/2/0.201:201"
        NAS-Port-Type = Ethernet
        NAS-IP-Address = 10.10.209.1
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
[chap] Setting 'Auth-Type := CHAP'
++[chap] = ok
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "user-pppoe", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] No EAP-Message, not doing EAP
++[eap] = noop
[files] users: Matched entry user-pppoe at line 30
++[files] = ok
++[expiration] = noop
++[logintime] = noop
[pap] WARNING: Auth-Type already set.  Not setting to PAP
++[pap] = noop
+} # group authorize = ok
Found Auth-Type = CHAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+group CHAP {
[chap] login attempt by "user-pppoe" with CHAP password
[chap] Using clear text password "user-pppoe" for user user-pppoe authentication.
[chap] chap user user-pppoe authenticated succesfully
++[chap] = ok
+} # group CHAP = ok
Login OK: [user-pppoe/<CHAP-Password>] (from client mx480-mts port 268435657)
# Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
+group post-auth {
++[exec] = noop
+} # group post-auth = noop
Sending Access-Accept of id 155 to 10.10.209.1 port 50760
        ERX-Service-Activate:1 += "REDIRECT(pp0)"
        ERX-Service-Activate:2 += "RATE-LIMIT(pp0,1000000)"
Finished request 0.

